No products in the cart.
Hiển thị 33–48 của 153 kết quả
KEY FEATURES
- Jaw Coupling
- Used with Bore Bushings
KEY FEATURES
- Jaw Style Coupling
- Polyurethane Insert
KEY FEATURES
- Coupling Sleeve Flange
- Accepts Split, Keyed Bushings bored for shaft
KEY FEATURES
- Standard Bearings: Commercially available Tapered Roller Bearings provide maximum overhung load capacity.
- Commercially available double lip seals ride on plunge ground shafts, with exclusive barrier seal arrangement..
- Options and Accessories: Complete range of motor mounts, belt guards, backstops.
The CENTA-FH coupling features a high-strength steel housing with an elastomeric insert that can be easily replaced when worn, reducing maintenance costs. Main purpose of the flange housing is to carry the weight of an connected cardan shaft. It is designed for easy installation and is available in a range of sizes and configurations to suit various applications. CENTA-FH coupling is a reliable, durable, and cost-effective solution for power transmission in demanding marine and industrial environments.
The CENTA-FH is a flange housing with internal taper bearing support to protect engine crankshafts from the reaction forces coming from high angle cardan shaft connections. The CENTA-FH compensates high forces resulting from large deflection angles of the connected components. The CENTA-FH transmits reaction forces to the engine housing for the protection of the crankshaft bearings. This robust flanged bearing housing is made of tempered aluminum. With a lightweight, compact design, the CENTA-FH bearing housing is extremely easy to maintain and durable. Features extensive ventilation to reduce the ambient temperature. Available with a speed-controlled centrifugal clutch for soft engagement of connected components, the CENTA-FH provides ideal torsional vibration tuning and minimum mounting and maintenance. The bearing housing is shipped pre-assembled as a unit for SAE standard flywheel connections.
CENTAFLEX-K/KE/KF series is a coupling with high torsional stiffness and resonance-free operation. Ideally suited for hydrostatic driven construction equipment, lower-horsepower applications are easily handled by the CENTAFLEX-K/KE/KF series. Built from shock-resistant glass-fiber reinforced plastic, the CENTAFLEX-K/KE/KF is highly robust with an axially short design. The series features blind assembly to minimize mounting effort requirements. Delivered with a flywheel connections according to SAE, the CENTAFLEX-K/KE/ KF is available with standard spline or the CENTALOC spline clamping hub to eliminate fretting corrosion and is also available for non-standard flywheels.
CENTAFLEX-A constant velocity driveshafts are available in various lengths to adapt to your needs and installation requirements. The highly flexible CENTAFLEX-A driveshafts are particularly well suited for use in marine, industrial, energy, and rail applications. The CENTAFLEX-A is a high-performer with high torsional elasticity. Built to damp torsional vibrations and shock loads, the CENTAFLEX-A element can compensate considerable axial, radial, and angular misalignments. Available in thin wall steel tube, carbon-fiber or glass-fiber designs, and with a split element option, the CENTAFLEX-A is easy to install and maintain with minimum effort. The electrically-insulating and thermally-resistant silicone element option offers a reliable, fail-safe, backlash-free transmission of high torques where needed.
Flexible elements for CENTAFLEX-A Type 0 couplings.
Flexible elements for CENTAFLEX-A Type 0-S couplings.
CENTAFLEX-ACV is a highly flexible constant velocity driveshaft, ideal for the connection of marine gear output flanges to propeller shafts, and for applications with considerable angular deflections. The CENTAFLEX-ACV offers torque transmission via a double cardan driveshaft featuring a CV joint on one side and a highly flexible rubber element on the other. Ideal for marine use, a self-aligning thrust bearing transmits propeller thrust to the boat hull. Specifically designed to reduce noise, vibration, and shock, the CENTAFLEX-ACV damps torsional vibrations while offering electrical insulation as well. The CENTAFLEX-ACV tolerates angular deflections of up to 3 degrees. This driveshaft is easy to install and can be mounted with minimal effort thanks to the easy-to-use clamping hub.
CENTAFLEX-AGM is a highly flexible constant velocity driveshaft ideal for connecting marine gear output flanges to propeller shafts in applications with moderate angular deflections. The CENTAFLEX-AGM offers backlash-free torque transmission with a double cardanic driveshaft, featuring two-highly flexible rubber elements. Ideal for marine use, propeller thrust is transmitted to the boat hull by a self-aligning thrust bearing. The CENTAFLEX-AGM is designed to reduce noise and minimize vibrations, ensuring less wear and tear on surrounding equipment. Built to damp torsional vibrations and shock loads, the CENTAFLEX-AGM tolerates angular deflections of up to 3 degrees. Additionally, the CENTAFLEX-AGM driveshaft offers a significant degree of electrical insulation. The driveshaft can be mounted with minimal effort using the clamping hub. Installation and maintenance are simple, and the product is delivered ready to install.
CENTAFLEX-AM is a highly flexible coupling, built for connecting marine gear output flanges with a propeller shaft, while isolating the boat hull from noise and vibration. The CENTAFLEX-AM provides backlash-free transmission of torque and propeller thrust using a highly flexible rubber element and thrust bearing. This coupling is specifically designed to reduce noise and vibrations, prolonging the life of surrounding equipment. The flexible coupling damps torsional vibrations and shock loads while offering a high degree of electrical insulation. Designed to compensate moderate axial, radial, and angular misalignments – a common cause of wear – the CENTAFLEX-AM is available in a wide range of standard sizes covering engine power up to several hundred kW. Easily mounted with a clamping hub, the CENTAFLEX-AM is delivered ready to install.
CENTAFLEX-M is a highly flexible CENTAFLEX coupling designed to connect gear output flanges to a propeller shaft, specifically in applications where mounting space is limited. Featuring a highly flexible rubber element, the CENTAFLEX-M offers backlash-free transmission of torque and propeller thrust. Designed to reduce noise and vibration under small and confined spaces, the CENTAFLEX-M damps torsional vibrations and shocks while limiting structural noise and providing significant electrical insulation. Built compact, the CENTAFLEX-M reduces handling and maintenance costs by omitting the additional components typically needed, like spacers. The CENTAFLEX-M compensates axial, radial, and angular misalignments for added safety and reduced wear and tear. Easy to mount by using the clamping hub, the CENTAFLEX-M is an ideal solution for limited mounting spaces.
The CENTAMAX-B is specially designed for well aligned independently-mounted generator sets and free-mounted drives, offering backlash-free transmission of medium torques. The fail-safe design of the CENTAMAX-B is characterized by a high torsional flexibility to damp torsional vibrations and minimize shock. The CENTAMAX-B design compensates axial and angular misalignments. Precompressed radial pins are offered for easy mounting, and the CENTAMAX-B features simple radial replacement of rubber elements and a maintenance-free design. Available for SAE flywheel connections as well as non-standard flywheels and shaft-to-shaft connections. CENTAMAX-B is well suited for diesel-electric locomotive drives where the engine and generator may sit at an unloaded idle speed condition for long periods of time.
Request Information →
The CENTAMAX-G was developed for torsionally-active generator and pump drives. Torque is transmitted to the rubber element through the interlocked outer flywheel flange. Available with CENTALAN-HT elastomer, a high-temperature tolerant, synthetic material developed to meet the dynamic characteristics of natural rubber mixtures. Characterized by high torsional flexibility with linear characteristics, the CENTAMAX-G couplings damp torsional vibrations and shock loads and compensate axial, radial, and angular misalignments. CENTAMAX-G is equipped with an industry standard taper-locking bushing for quick and easy installation. Available for engine and generator connections according to DIN-6281. The CENTAMAX-G is available with flywheel connections according to SAE and offers a plug-in version for easy assembly and mounting.